Solvo Get My Solar Quote
Illustration: a hillside home in Kandy with a full solar roof and installation scaffold

Solar Panel Installation for Your Own Kit, by Registered Installers

Already bought your solar panels, inverter or batteries? We match you with a registered installer. They check your kit and fit it. This solar panel installation service covers off-grid and hybrid kits, bought in Sri Lanka or imported.

Get My Installation Quote

Or send your kit list on WhatsApp: 077 000 0000

  • Only SLSEA-registered installers
  • [HOLD: partner names with “registered with SLSEA (no. …)” once partners sign, shown with their permission]
  • Solvo doesn’t install. We match you with an installer. [CONFIRM: Q1 buyers pay nothing to the site, yes or no. Default if no answer: say nothing about fees; keep the trust-bar line as written. Checked: audits/14-final-review-and-questions-14Nov2026.md Q1, not answered by 16 Nov 2026]

Who this service is for

This service is for people who already have the gear. You pay the installer for the work, plus any parts your kit still needs.

Illustration: customer-supplied solar panels, inverter and battery before installation
  • You bought the parts yourself. Panels, an inverter, batteries or all three. From a shop in Sri Lanka, online, or imported.
  • Your kit has an off-grid or hybrid inverter. These kits run with a battery bank. Our partner installers take these jobs.
  • Your kit has an on-grid inverter and no batteries. We don’t pass these jobs on. See the inverter table below.

It covers solar installation at home, on a roof or a ground frame. [CONFIRM: Q17 partners also fit kits for small shops and offices, yes or no. Default if no answer: homes only. Checked: audits/14-final-review-and-questions-14Nov2026.md Q17, not answered by 16 Nov 2026]

Panels aren’t on-grid or off-grid. The inverter is. So the form asks which inverter you have.

What the installation visit covers

A registered installer visits your site before any work starts. The service covers five steps:

  1. A site inspection.They look at your roof or land, your main board and the cable route.
  2. A check of your kit.They read the model labels and spec sheets on each part.
  3. A fitting plan.Where the panels go, where the inverter and batteries sit, and how the cables run.
  4. A written quote.The fee for the work, plus any parts you still need.
  5. Fitting, testing and handover.This happens on the agreed day, after you accept the quote.

[CONFIRM: Q6 the site visit is free, yes or no. Default if no answer: don’t say “free”; keep “after a site visit and inspection”. Checked: audits/14-final-review-and-questions-14Nov2026.md Q6, not answered by 16 Nov 2026]

Get My Installation Quote

What the installer checks before fitting your kit

The installer checks two things first: your site and your gear. A problem found now costs less than a problem found on the roof.

Your site:

  • Roof space and strength. The panels and frames add weight. The installer checks the roof can take it.
  • Roof type. Tile, asbestos, metal sheet or a concrete slab each need different fixings. Asbestos sheets are fragile and can break under a person’s weight. Ask how the installer works on them safely. A ground frame is another option.
  • Shade. Even a little shade on one panel can cut the power from the whole row. Trees, walls and water tanks matter.
  • Your main board and wiring. The inverter joins your home wiring here. Old wiring may need work first.

Your gear:

  • Panels and inverter match. The panel voltage and total watts must fit the inverter’s solar input limits.
  • Batteries and inverter match. The battery voltage and type must suit the inverter. Some lithium batteries talk only to certain inverter brands.
  • Home supply. The inverter must suit your 230V home supply. It must also match single-phase or three-phase wiring.
  • Condition. The installer looks for damage from shipping or storage.
  • Missing parts. Mounting rails, cables, breakers, isolators, earthing and surge protectors may not come in the box.

Ask the installer to list any part that doesn’t match, in writing, before work starts.

How the installer fits your kit

Every site is different. A typical off-grid or hybrid install follows these steps.

  1. Fix the mounting.The installer fixes rails and clamps to the roof, or builds a ground frame.
  2. Fit the panels.They bolt the panels to the rails and join them in rows.
  3. Run the DC cable.Solar cable runs from the panels to the inverter spot.
  4. Mount the inverter and batteries.These usually sit on a wall or a rack near your main board.
  5. Fit the safety parts.DC and AC breakers, isolators, earthing and surge protectors go in.
  6. Connect to your main board.Have a grid line or a generator? It can join as a backup supply.
  7. Set up the inverter.The installer enters the battery type and the charge settings. For off-grid, ask them to set the kit to send no power back.
  8. Test and hand over.Ask them to show you the inverter screen and the battery levels.

Ask who you call for service after the install. [CONFIRM: Q33 who services the system after handover, the installer or the site. Default if no answer: the installer. Checked: audits/14-final-review-and-questions-14Nov2026.md Q33, not answered by 16 Nov 2026]

Solar panel installation fee: what sets it

The fee depends on two things: your system size and the site work. The installer sets it after a site visit and inspection.

What changes the fee:

  • System size. More panels and a bigger battery bank mean more hours of work.
  • Roof or frame. A high or steep roof needs more time. A ground frame needs its own build.
  • Cable runs. A long run from the panels to the inverter needs more cable and labour. One installer’s price list prices underground cabling on its own, after a site inspection.
  • Parts you still need. Rails, cable, breakers, earthing and surge protectors cost extra if your kit lacks them.
  • Work on your wiring. Old wiring or a full main board may need work first.

[CONFIRM: Q15 a starting fee for install-only jobs, or leave out. Default if no answer: no fee figure, just “set by system size and site work”. Checked: audits/14-final-review-and-questions-14Nov2026.md Q15, not answered by 16 Nov 2026]

[CONFIRM: Q16 which parts partners can supply on install-only jobs, at extra cost: rails, cables, breakers, earthing, surge protection. Default if no answer: yes, “at extra cost, listed in the quote”. Checked: audits/14-final-review-and-questions-14Nov2026.md Q16, not answered by 16 Nov 2026]

Ask for the quote in writing. Each part and the labour should have its own line.

Get My Installation Quote

Warranty: the installer covers the work, not your gear

Your installer gives a warranty on the installation work. The panels, inverter and batteries stay at your own risk. Any warranty on them comes from the shop or the maker.

[CONFIRM: Q34 installer workmanship warranty years. Default if no answer: hide the years; keep “ask your installer, in writing”. Checked: audits/14-final-review-and-questions-14Nov2026.md Q34; website-instructions.md, Telegram 767, warranty on the work only, no years given]

Before the visit, put these papers together:

  • Invoices for each part, with the date you bought it.
  • Warranty cards and serial numbers.
  • Spec sheets for the panels, inverter and batteries.

Imported the gear yourself? Ask the seller how a warranty claim works from Sri Lanka. Some makers want the faulty part sent back.

Ask the installer to test each part before fitting it. Ask them to note any fault in writing.

Off-grid, hybrid or on-grid inverter: who fits it

The inverter decides who fits your kit. Check its model label or spec sheet.

Your inverter Batteries Who fits it
Off-grid inverter Yes One of our partner installers
Hybrid inverter Yes One of our partner installers
On-grid inverter No An installer you pick from the directory

Hybrid kits: many can send spare panel power back to the CEB or LECO grid. Not every model can export, so get your model’s export ability in writing. CEB or LECO must approve that connection first.

[CONFIRM: Q35 can partners get grid approval for hybrid mode, and with or without export. Default if no answer: hide partner grid-approval lines; keep “ask your installer”. Checked: audits/14-final-review-and-questions-14Nov2026.md Q35, not answered by 16 Nov 2026]

On-grid kits: our partners fit off-grid and hybrid kits only. Our directory lists companies registered with SLSEA, by district, from SLSEA’s public register. Find registered solar companies near you, then call them yourself.

Not sure which inverter you have? Send a photo of its label on WhatsApp.

Common questions

Can I install solar panels myself?

We don’t advise it. Panels make live DC power whenever light hits them. A wrong connection can start a fire or damage the inverter. Ask a registered installer or a qualified electrician.

Will an installer fit panels I imported myself?

Often, yes. Partners take gear bought in Sri Lanka or imported, case by case. The installer checks the models and papers first. Keep the invoices and spec sheets ready.

Do I need approval to install my own solar system?

An off-grid kit can pull power from a grid line for backup. No power goes back, so there’s no net metering or export agreement. A hybrid kit that sends power back needs CEB or LECO approval first. Ask your installer if CEB or LECO needs to know about your backup line.

Do you cover my area?

[CONFIRM: Q8 we take requests from every district in Sri Lanka; installer cover by district once partners sign. Default if no answer: yes, the whole island. Checked: audits/14-final-review-and-questions-14Nov2026.md Q8; website-instructions.md, Telegram 727]

Get a fee quote for solar installation at your home

Tell us your district and what kit you have. Add the model names from the labels. Then use the form to ask for a quote for fitting your kit.

We pass off-grid and hybrid requests to an installer registered with SLSEA. [CONFIRM: Q3 and Q4 how many installers get each request, and how fast they call. Default if no answer: don’t promise “one”; no time promise. Checked: audits/14-final-review-and-questions-14Nov2026.md Q3 and Q4, not answered by 16 Nov 2026]

Get My Installation Quote

Last reviewed November 2026 by Abdul Rahman.

This page is general information, not electrical advice. Ask a registered installer or a qualified electrician to check your wiring before any install.

Get My Solar Quote